|
iMetos Manual (iMetos User Manual)
|
|
|
1 Imetos Manual Introduction |
|
|
1.1 Unpack your iMETOS - the different models |
|
|
1.2 Start-up the iMETOS |
|
|
1.3 Going Step by step trough the Start process |
|
|
1.4 Setting up the iMETOS |
|
|
1.5 replacing the iMETOS Fuse |
|
|
2 Installing the iMETOS with the climate sensors in the field |
|
|
2.1 Installing the soil moisture sensors |
|
|
2.2 Installing Rain Gauge |
|
|
2.3 Installing the Leaf Wettness Sensor |
|
|
2.4 Installing the Wind Speed Sensor |
|
|
2.5 Installing the FUP-Temperature and Relative Humidity Sensor |
|
|
2.6 Installing the HC-Temperature and Relative Humidity Sensor |
|
|
2.7 Changing from FUP to HC-Temperature and Relative Humidity Sensor |
|
|
2.8 Installing the Soil Temperature Sensor |
|
|
2.9 Installing the Wet Bulb Temperature Sensor |
|
|
2.10 Installing the Dry Bulb Temperature Sensor |
|
|
2.11 Installing the Air Temperature Sensor |
|
|
2.12 Installing the Global Radiation and the Wind Direction Sensor |
|
|
3 Installing Sensors basing on the iMETOS Bus |
|
|
3.1 The Watermark Extension Bus |
|
|
3.2 The Multiple Temperature and Relative Humidity Bus |
|
|
3.3 The Multiple Leaf Wetness Sensor Bus |
|
|
3.4 The Multiple Pressure Switch Bus |
|
|
3.5 The Multiple Temperature Bus Based on DS1820 |
|
|
3.6 The Multiple Temperature Bus based on PT 1000 Sensors |
|
|
3.7 The Multiple Enviroscan and TriScan Sensor Bus |
|
|
3.8 Using Enviroscan and TriScan Sensors on the PI Bus |
|
|
3.9 Supporting the 05103 Wind Sentry of RMYoung |
|
|
3.10 Water Level Sensors for Evapotranspiration Pan |
|
|
3.11 Water level sensors for Water Level Measurement |
|
|
3.12 Using the Kipp and Zonen CMP3 Globl Radiation sensor |
|
|
3.13 ECH2O EC-5, EC-10, EC-20LWS |
|
|
3.14 Connection schema of Decagon 2xHS & 1xMPS1 |
|
|
3.15 Connection Schema of Water Meter PCB |
|
|
3.16 Connecting AquaSpyProbes |
|
|
4 Tools and Tips |
|
|
4.1 Using the PanCon Connector |
|
|
4.2 Using the RS 232 Interface Card for Testing and Analysing the iMETOS |
|
|
4.3 Installing a Directional Antenna |
|
|
4.4 Changing the iMETOS Main PCB |
|
|
5 Troubleshooting |
|
|
5.1 Communication |
|
|
5.1.1 Modem LED blinks continiously short or is allways on |
|
|
5.1.2 Problems in Frequency Selection |
|
|
5.2 How to detect damaged batteries |
Home Page