Loading...
 
Print

Using the terminal mode

With the battery connected to the iMetos proceed as follows:

1.      Plug USB cable to the iMetos

2.      Plug the USB cable to the PC

3.      Place Jumper 1 set (G in the Picture 11)

4.      Run the application PI_uploader

5.      click on “Open Port” button

You will get the main menu. If not press space bar in your keyboard

Navigation through the menus is done by pressing keys, which are specified on the screen and given below in brackets. To navigate back to the parent menu press “ESC” on your keyboard or click over the “Esc” button. The terminal window can be cleared by clicking “Clear” or saved to a RTF file by clicking “Save Log”.

=============

MAIN MENU

=============

(1)     SYSTEM

(2)     SENSORS

(3)     MODEM SETTINGS

6.           Press 1 to go to the system menu and get:

=============

MAIN MENU > SYSTEM

=============

(1)     QUICK VIEW

(2)     FULL REPORT

(3)     FACTORY RESET

The following options are available:

    (1)    in the menu SYSTEM:

            (1)        QUICK VIEW: gives some basic station, modem and server information.

            (2)        FULL REPORT: gives a detailed report on the station including the station settings and events.

            (3)        FACTORY RESET: discards the station settings, measured data and APN table.

7.      press Esc to return to main menu

8.      press 2 to get sensors menu

=============

MAIN MENU > SENSORS

=============

(T)     DO SENSOR TEST

(W)     WIRELESS TEST

(P)     PRINT LAST MEASURED DATA

(S)     PRINT LIST OF SUPPORTED SENSORS

(I)     STORE MEASURED DATA

(R)     PRINT ENCODED RECORDS

(D)     DISCARD SENSOR DATABASE

(ESC)   BACK

    (2)    in the menu SENSORS:

            (T)        TEST OF SENSORS: opens the sensor test menu (see below).

            (M)      DO MEASUREMENT ONLY: prompts the iMetos3.3 to start a measurement. A submenu is opened in which you can select a chain

                       by pressing (1) - (7) or all sensors by pressing (A).

            (P)        PRINT LAST MEASURED DATA

            (S)        PRINT LIST OF SUPPORTED SENSORS

            (I)         STORE DATA IN MEM: prompts a logging event.

            (R)       PRINT ENCODED RECORDS: shows all stored data encoded as weather bin (data transfer format)

            (D)       SET DATABASE TO DEFAULT: discards the station settings and measured data (the APN table is kept).

9.      press Esc to return to main menu

10.  press 3 to get the modem settings menu

=============

MAIN MENU > MODEM SETTINGS

=============

(1)     GET MODEM INFO

(2)     UNLOCK SIM CARD (PIN CODE)

(3)     SIGNAL QUALITY GRAPH

(4)     APN OF CUSTOMER

(5)     SERVER REDIRECTION

   (3)     in the menu MODEM SETTINGS:

(1)  GET MODEM INFO: shows IMEI, SIM card number, type of modem...

=============

MAIN MENU > MODEM SETTINGS > GET MODEM INFO

=============

Modem Brand:            Sierra Wireless

Modem Type:             SL6087 Product

Modem FwVersion:        R7.46

Modem IMEI:             354293068370835

Modem bearer type:      GPRS

Modem Baudrate:         115200

SIM status:             Inserted ( SIM ID: 8943015614107200408 )

SIM locking:            UNBLOCKED

(2)  UNLOCK SIM CARD: check whether the PIN number request is enable and also

provides means to disable it.

(3)  SIGNAL QUALITY GRAPH: gives a representation of the carrier signal quality

=============

MAIN MENU > MODEM SETTINGS > SIGNAL QUALITY GRAPH

=============

        --

        (Esc)   <- exit from this menu item

        --

        Signal:    >| | | | | | | | | ...<    ( RSSI: 29 / BER: 0 )

(4)  APN OF CUSTOMER : it let you directly configure the Access Point Name for the specific provider

=============

MAIN MENU > MODEM SETTINGS > APN OF CUSTOMER

=============

CURRENT APN ACCESS DEFINED BY USER:

-There is not defined APN by user

CHOOSE THE ACTION:

--

(I)     INSERT NEW APN ACCESS

(D)     DELETE DEFINED USER APN

            (5)        SERVER REDIRECTION: It allows you to change the ULR address of the server

=============

MAIN MENU > MODEM SETTINGS > SERVER REDIRECTION

=============

CURRENT SERVER SETTINGS:

        Domain name:            metos.at

        URL address:            /pikernel_dev/metos_upload_xml33.php

        Port:                   80

CHOOSE THE ACTION:

--

(R)     REDIRECT SERVER

(D)     RESET SERVER REDIRECTION

Clue:

If there is no menu visible, press Space on your keyboard to refresh the screen!

Note:

Options in the Terminal Menu can be changed with new Firmware.

 


Created by system. Last Modification: Monday 24 of August, 2015 14:23:11 GMT by apessl.